注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

计算机科研与技术

QQ 11360330

 
 
 

日志

 
 

西安科技大学2012年被EI收录的部分论文  

2014-09-19 10:51:37|  分类: 论文写作发表 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

301. Research on seismic behaviour factor of CBSF

Li, Cheng (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Yang, Junfen; Gu, Qiang Source: Applied Mechanics and Materials, v 166-169, p 2326-2331, 2012, Progress in Structures

302. Effect of indoor thermal environment on building energy consumption

Cai, Kun (Department of capital construction, Xi'an university of science and technology, Xi'an 710054, China); Chen, Zheng-dong; Yang, Xue-bin; Zhang, Yao-fen; Li, Ming-Xue Source: Applied Mechanics and Materials, v 193-194, p 137-141, 2012, Frontiers of Green Building, Materials and Civil Engineering II

303. Coupling effect between single key strata and the overburden thick sandy soil layer

Zhang, Pei (Key Laboratory of Western Mine Exploitation and Hazard Prevention of Ministry of Education, Energy School, Xi'an University of Science and Technology, Xi'an, Shaanxi 710054, China); Huang, Qing-Xiang Source: Advanced Materials Research, v 374-377, p 1295-1298, 2012, Sustainable Development of Urban Environment and Building Material

304. Study on diversity of soil microbial in different reclamation years

Zhao, Xiaoguang (College of Geology and Environment, Xi'an University of Science and Technology, 58 Goose Pagoda Road, Xi'an, China); Xie, Juan; Song, Shijie; Chen, Ting Source: Advanced Materials Research, v 361-363, p 1703-1707, 2012, Natural Resources and Sustainable Development

305. Mix design of compaction-free porous concrete permeable base

Sheng, Yanping (School of Materials Science and Engineering, Chang'an University, Xi'an 710064, China); Li, Haibin; Guan, Bowen Source: Advanced Materials Research, v 368-373, p 1416-1419, 2012, Advances in Civil Engineering and Architecture Innovation

306. Partitioning prediction on the risk of water inflow of the roof in Huangling No.2 mine

Feng, Jie (School of Geology and Environment Engineering, Xi'an University of Science and Technology, Xi'an, 710054, China); Hou, Enke; Deng, Niandong; Ma, Gongshe; Li, Ximin Source: Advanced Materials Research, v 361-363, p 39-42, 2012, Natural Resources and Sustainable Development

307. Optic method to measure the density of gas and the analysis on uncertainty of measurement

Guo, Changli (College of Sciences, Xi'an University of Science and Technology, Xi'an 710054, China); Zhang, Yanqing Source: Advanced Materials Research, v 361-363, p 226-231, 2012, Natural Resources and Sustainable Development

308. Initial analysis on the Chinese traditional symbol and the contemporary regional architecture

Hu, Tian (School of Architecture, Xi'an University of Architecture And Technology, Shaanxi Xi'an, China); Wu, Yarui Source: Advanced Materials Research, v 368-373, p 3459-3464, 2012, Advances in Civil Engineering and Architecture Innovation

309. Study on the natural vibrations of the rubber bearings

Li, Fang (Institution of Vibration and Noise, Navy University of Engineering, China); Yang, Xue; Shuai, Changgeng; He, Lin; Li, Ming Source: Advanced Materials Research, v 421, p 800-805, 2012, Advanced Design Technology

310. Design and implementation of software testing cases management system based on J2EE

Lu, Jianjun (Communication and Information Engineering College, Xi'an University of Posts and Telecommunications, Xi'an 710061, China); Su, Ning; Zhao, Anxin Source: Lecture Notes in Electrical Engineering, v 154 LNEE, p 1268-1274, 2012, Information Engineering and Applications - International Conference on Information Engineering and Applications, IEA 2011

311. The study on vehicle EHA active suspension with time-delay control

Kou, Farong (College of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, 710054, China) Source: Applied Mechanics and Materials, v 178-181, p 2002-2005, 2012, Sustainable Environment and Transportation

312. A shape-based two-stage product image retrieval method

Gong, Shangfu (School of Computer Science, Xi'an University of Science and Technology, Xi'an, China); Du, Juan Source: Applied Mechanics and Materials, v 466-467, p 1050-1054, 2012, Intelligent System and Applied Material

313. The design of coal mine construction safety monitoring system

Shao, Xiao-Qiang (School of Electric and Control Engineering, Xi'an University of Science and Technology, Shaanxi Xi'an, China); Ma, Xian-Min Source: Applied Mechanics and Materials, v 174-177, p 3459-3462, 2012, Advanced Building Materials and Sustainable Architecture

314. Research on PMnN-PZT ferroelectric thin films on silicon substrates

Zhang, Tao (College of Science, Xi'an University of Science and Technology, Xi'an 710054, China); Ma, Hongwei; Li, Min; Li, Baihong; Liu, Ping Source: Applied Mechanics and Materials, v 157-158, p 241-244, 2012, Mechatronics and Applied Mechanics

315. Study on the principle of tunnel collapse treatment and its application

Mu, Lin (Xi'an Branch of China Coal Research Institute, Xi'an 710054, China); Huo, Zhenlong; Fan, Yonghui Source: Advanced Materials Research, v 378-379, p 799-803, 2012, Applied Materials and Electronics Engineering, AMEE 2012

316. Seismic response analysis of a high-rise tower with complex structure

Bao, Liyuan (No. 1of Baisha Road, Xi'an, Shaanxi, 710068, China); Su, Sanqing; Hou, Junfeng; Guo, Huan Source: Advanced Materials Research, v 368-373, p 1058-1063, 2012, Advances in Civil Engineering and Architecture Innovation

317. Analysis of key safety factors mining large section working face to steep seams

Shao, Xiaoping (Post-doctoral Mobile Research Center of Geological Resources and Geological Engineering, Xi'An University of Science and Technology, Xi'an 710054, China); Shi, Pingwu; Xia, Yucheng Source: Advanced Materials Research, v 361-363, p 246-249, 2012, Natural Resources and Sustainable Development

318. Force characteristic analysis of overlying stratum based on elastic foundation beam theory

Wu, Lei (Physics and Electrical Engineering Institute, Anqing Teachers College, Anqing Anhui, 246011, China); Li, Ming; He, Min Source: Advanced Materials Research, v 368-373, p 3167-3170, 2012, Advances in Civil Engineering and Architecture Innovation

319. Corrosion properties of rebar welded joints

Tang, Li Yun (Xi'an University of Science and Technology, Xi'an, China); Xiao, Qian Hui; Zhang, Shu Yun Source: Applied Mechanics and Materials, v 166-169, p 1981-1986, 2012, Progress in Structures

320. Research on the bounding-inbox localization algorithm for wireless sensor networks based on RSSI

Yang, Xue-Cun (School of Electric and Control Engineering, Xi'an University of Science and Technology, Xi'an City, China); Hou, Yuan-Bin; Kong, Ling-Hong Source: Applied Mechanics and Materials, v 135-136, p 814-819, 2012, Advances in Science and Engineering II

321. Mechanics analysis of grade V surrounding rock primary support in maanziliang tunnel

Han, Jiaming (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, No. 58 Yanta Zhonglu, Xi'an, Shannxi, 710054, China) Source: Applied Mechanics and Materials, v 164, p 414-417, 2012, Applied Mechanics, Materials, Industry and Manufacturing Engineering

322. Research on ground subsidence law using FEM for comprehensive mechanized caving coal mining under railway

Wang, Yang (Department of Civil Engineering, Engineering College of Armed Police Force, Xi'an 710086, China); Li, Qingyuan Source: Applied Mechanics and Materials, v 178-181, p 1479-1483, 2012, Sustainable Environment and Transportation

323. Research on surface failure mechanism and building stability for coal mining

Ji, Hong (School of Geologic and Environment Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, 710054, China); Yu, Xueyi; Gao, Zhixing Source: Advanced Materials Research, v 368-373, p 2165-2168, 2012, Advances in Civil Engineering and Architecture Innovation

324. Simulation experiment of embedded fiber Bragg grating monitoring in rock deformation through borehole

Chai, Jing (School of Energy Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi 710054, China); Qiu, Biao; Li, Yi; Zhu, Lei Source: Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, v 29, n 1, p 44-47, January 2012 Language: Chinese

325. Study on the properties of mesogenic monomer exhibiting blue phase and synthesis of Side-Chain Liquid-Crystalline Polysiloxanes

Li, Ying (Department of Applied Chemistry of Science College, Northwestern Polytechnical University, Xi'an 710072, China); Zhang, Guang-Cheng; Shao, Shui-Yuan Source: Advanced Materials Research, v 399-401, p 1071-1074, 2012, New Materials, Applications and Processes

326. Calculation of phonon dispersion for 3d transition metals Cr and Fe by modified analytic embedded atom method

Xie, You (College of Science, Xi'an University of Science and Technology, Xi'an 710054, Shaanxi, China); Zhang, Jian-Min Source: Advanced Materials Research, v 411, p 532-536, 2012, Precision Engineering and Non-Traditional Machining, PENTM 2011

327. Research on detection evaluation and reinforcement technique of piled wharf

Ning, Zhuang (College of Harbor Coastal and Offshore Engineering, Hohai University, Nanjing, China); Ge, Song; Chen, Da; Li, Junwei; Ye, Wanjun Source: Advanced Materials Research, v 368-373, p 2259-2263, 2012, Advances in Civil Engineering and Architecture Innovation

328. The development of the GAT high accuracy magnetic suspension gyro station and the application on the underground engineering

Gong, Yun (College of Geology Engineering and Geomatics, Chang'an University, Xi'an, China); Yang, Zhiqiang; Shi, Zhen Source: Applied Mechanics and Materials, v 157-158, p 1537-1540, 2012, Mechatronics and Applied Mechanics

329. Numerical simulation of heat transfer characteristics of dimpled plate

Ji, Changfa (School of Energy and Resource, Xi'an University of Science and Technology, Xi'an 710054, China); Liu, Xiaobing; Liu, Rui Source: Applied Mechanics and Materials, v 170-173, p 2686-2692, 2012, Progress in Civil Engineering

330. Prediction of blast-induced ground vibration using support vector machine by tunnel excavation

Li, Dongtao (School of Mechatronical Engineering, Beijing Institute of Technology, Beijing, 100081, China); Yan, Jinglong; Zhang, Le Source: Applied Mechanics and Materials, v 170-173, p 1414-1418, 2012, Progress in Civil Engineering

331. Discussion on the calculation method of the deep buried tunnel surrounding rock loose pressure

Yun, Yongfeng (School of Civil Engineering, Chongqing University, Chongqing 400045, China); Wu, Delun Source: Applied Mechanics and Materials, v 193-194, p 757-761, 2012, Frontiers of Green Building, Materials and Civil Engineering II

332. Research on structural influencing coefficient of moment-resisting steel frames

Li, Cheng (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Gu, Qiang; Wang, Jun Source: Applied Mechanics and Materials, v 105-107, p 937-942, 2012, Vibration, Structural Engineering and Measurement I

333. A quantitative approach to assessing product design for remanufacturing

Li, Juan (School of Management, Northwestern Polytechnical University, Xi'an, China); Liang, Gongqian Source: Applied Mechanics and Materials, v 110-116, p 4893-4898, 2012, Mechanical and Aerospace Engineering

334. The research on geological characteristics of the Dafosi coal mine company 40110 working face

Han, Jiaming (School of Architecture and Civil Engineering, Xi'An University of Science and Technology, No.58 Yanta Zhonglu, Xi'an, Shannxi, 710054, China) Source: Applied Mechanics and Materials, v 170-173, p 1273-1276, 2012, Progress in Civil Engineering

335. Numerical simulation of vertical ground stress distribution along fault trend direction in a metal mine

Wang, Youxi (Energy School, Xi'an University of Science and Technology, Xi'an Shanxi 710000, China); Deng, Guangzhe Source: Applied Mechanics and Materials, v 204-208, p 119-122, 2012, Progress in Industrial and Civil Engineering

336. A image segmentation method of improved ant colony algorithm for the manipulator self-recognition target

Hou, Yuanbin (School of Electric and Control Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Meng, Yang; Mao, Jinbo Source: Applied Mechanics and Materials, v 135-136, p 50-55, 2012, Advances in Science and Engineering II

337. Analysis and design an electro-hydraulic type belt capture device for belt conveyor

Zhang, Xuhui (Dept. of Mechanical Eng., Xi'an University of Science and Technology, Xi'an 710054, China); Ma, Hongwei; Zhang, Dawei; Mao, Qinghua; Lin, Chen Wei Source: Applied Mechanics and Materials, v 121-126, p 1901-1905, 2012, Frontiers of Manufacturing and Design Science II

338. Study on ultrasonic P-scan imaging technology for rotary parts used in coal mine machinery

Dong, Ming (School of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Ma, Hongwei; Chen, Yuan Source: Advanced Materials Research, v 468-471, p 3126-3130, 2012, Automation Equipment and Systems

339. Effect evaluation of inhibitor to barium sulfate and strontium sulfate

Chen, Chuangqian (College of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Li, Kanshe; Kang, Jie; Yu, Chunxia; Liu, Jing Source: Advanced Materials Research, v 402, p 41-45, 2012, Advances in Metallurgical and Mining Engineering

340. Kinetic characteristics analysis and simulation research on carrier robot

Wei, Juan (College of Mechanical Engineering, Xi'an University of Science and Technology, Shaanxi, xi'an 710054, China); Ma, Hongwei Source: Advanced Materials Research, v 346, p 359-363, 2012, Sustainable Construction Materials and Computer Engineering

341. Blasting vibration waveform prediction method based on superposition principle

Yang, Nian-Hua (China Academy of Railway Sciences, Beijing 100081, China); Zhang, Le Source: Baozha Yu Chongji/Explosion and Shock Waves, v 32, n 1, p 84-90, January 2012 Language: Chinese

342. Study on the heavy metal sediment pollution and ecological effect in Yin-dong Liang mine area

Yang, Meizhong (Department of Geology and Environment, Xi'an University of Science and Technology, Shaanxi, Xi'an, 710054, China); Chen, Jianping; Pu, Shihua Source: Advanced Materials Research, v 356-360, p 2506-2509, 2012, Progress in Environmental Science and Engineering

343. Microstructure of magnesium-aluminum metal matrix composites reinforced with 2wt.% SiC particles

Zhang, Runlan (College of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Liu, Xiangrong; Zhou, Tanwei; Yang, Jianli Source: Advanced Materials Research, v 413, p 207-212, 2012, Materials Science and Engineering Application II

344. Heat transfer enhancement and pressure drop for R417A flow boiling in internally grooved tubes

Zhang, Xiaoyan (Institute of Energy Engineering, Xi'an University of Science and Technology, Xi'an 710054, China) Source: Advanced Materials Research, v 354-355, p 732-738, 2012, Progress in Power and Electrical Engineering

345. Study on dynamic strength characteristics of Malan loess

Wang, Nianqin (College of Geology and Environment, Xi'an University of Science and Technology, Xi'an, Shaanxi, 710054, China); Liu, Xiaoling; Luo, Donghai; Yao, Yong Source: Applied Mechanics and Materials, v 170-173, p 964-968, 2012, Progress in Civil Engineering

346. Study on decision planning of real estate project

Wang, Yaning (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an, 710054, China) Source: Applied Mechanics and Materials, v 209-211, p 1376-1380, 2012, Sustainable Cities Development and Environment

347. Applied research on straw bale in northwest rural residential building

Li, Xueping (School of Architectural and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China) Source: Applied Mechanics and Materials, v 204-208, p 3815-3818, 2012, Progress in Industrial and Civil Engineering

348. Fault diagnosis of conveyance machine based on fuzzy support vector

Hou, Yuanbin (School of Electric and Control Engineering, Xi'an University of Science and Technology, Xi'an City, China); Li, Ning; Guo, Fan; Chen, Jing Source: Applied Mechanics and Materials, v 135-136, p 547-552, 2012, Advances in Science and Engineering II

349. Experimental study on infrared spectrum characteristics of coal in low temperature oxidation

Zhang, Yanni (Key Laboratory of Western Mine Exploitation and Hazard Prevention of Ministry of Education, College of Energy Science and Engineering, Xi'an University of Science and Technology, Xi'an, China); Deng, Jun; Wang, Weifeng; Li, Shirong; Hou, Shuang Source: Applied Mechanics and Materials, v 184-185, p 1394-1399, 2012, Frontiers of Mechanical Engineering and Materials Engineering

350. Workspace analysis and calculation for the manipulator of a explosive-handling robot in mine

Tian, Haibo (College of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an, China); Li, Aimin; Kou, Farong Source: Applied Mechanics and Materials, v 192, p 211-216, 2012, Advanced Mechanical Engineering II

351. Non-linear dynamics of a flexible multi-rotor bearing system with a fault of parallel misalignment

Li, Zigang (Department of Mechanics, Xi'an University of Science and Technology, Xi'an 710054, China); Li, Ming Source: Applied Mechanics and Materials, v 138-189, p 104-110, 2012, Applied Mechanics and Mechanical Engineering II

352. Analysis of the ferroresonance of 110 kV power systems

Shang, Li-Qun (Xi'an University of Science and Technology, Xi'an 710054, China); Ya, Hong Source: Applied Mechanics and Materials, v 157-158, p 907-910, 2012, Mechatronics and Applied Mechanics

353. The effect of heat treatment on corrosion resistance of Ni-W-P-Al 2O3 composite coating

Sun, Wan Chang (School of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi 710054, China) Source: Advanced Materials Research, v 468-471, p 1177-1180, 2012, Automation Equipment and Systems

354. The research on the psychological quality for university sports development training

Wei, Wei (Xi'an University of Science and Technology, P.E. Department, Xi'an, Shanxi 710054, China) Source: Advances in Intelligent and Soft Computing, v 146 AISC, p 321-327, 2012, Emerging Computation and Information Technologies for Education - Proceeding of 2012 International Conference on Emerging Computation and Information Technologies for Education, ECICE 2012

355. A rapid one-step process for fabrication of superhydrophobic surface by electrodeposition method

Chen, Zhi (Department of Applied Physics, Northwestern Polytechnical University, Xi'an 710129, China); Hao, Limei; Chen, Anqi; Song, Qingjun; Chen, Changle Source: Electrochimica Acta, v 59, p 168-171, January 1, 2012

356. Pseudo-plate method of high-strength steel fiber concrete multi-ribbed slab

Qiu, Jisheng (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Xiong, Guanghong Source: Advanced Materials Research, v 368-373, p 1626-1631, 2012, Advances in Civil Engineering and Architecture Innovation

357. The function of human power factor in industrial clusters competitiveness - The case of Yulin's energy chemical industry cluster

Zhao, Jing (Department of Teaching and Research of Political and Ideological Theory Course, Xi'an University of Science and Technology, Xi'an, China); Bai, Yin Source: Advanced Materials Research, v 347-353, p 3054-3057, 2012, Renewable and Sustainable Energy

358. Synthesis and application of novel heavy metal ions chelator

Liu, Zhuan-Nian (College of Geology and Environment, Xi'an University of Science and Technology, Xi'an, China); Song, Ye-Jing; Han, Xiao-Gang Source: Advanced Materials Research, v 374-377, p 937-940, 2012, Sustainable Development of Urban Environment and Building Material

359. Design of gas leakage monitoring system based on CAN bus

Chen, Yijing (Electrical and Control Engineering Institute, Xi'an University of Science and Technology, Xi'an, Shaanxi Province, China); Zan, Hongyang; Li, Wengui Source: Applied Mechanics and Materials, v 135-136, p 402-407, 2012, Advances in Science and Engineering II

360. Preparation and ESR properties of silicon nitride nanowires

Chen, Jin (Faculty of Materials, Xi'an University of Science and Technology, xi'an, 710054, China); Wang, Xiaogang; Zhang, Haiyan Source: Applied Mechanics and Materials, v 164, p 69-72, 2012, Applied Mechanics, Materials, Industry and Manufacturing Engineering

361. CFD modeling of the fast pyrolysis of coal in cold flow fluidized bed

Zhou, Anning (School of Chemistry and Chemical Engineering, Xi'An University of Science and Technology, Xi'an 710054, China); Zhang, Tieshuan; Ren, Xiubin; Zheng, Lizhen Source: Advanced Materials Research, v 396-398, p 209-212, 2012, Advances in Chemical Engineering

362. Prediction of the ground settlements induced by shallow-buried subway tunneling in the loess region

Han, Dong (Hebei Institute of Architectural Design and Research Co. Ltd., Shijiazhuang, Hebei, 050011, China); Su, Sanqing; Yu, Yang Source: Advanced Materials Research, v 368-373, p 1259-1263, 2012, Advances in Civil Engineering and Architecture Innovation

363. Experiment on ultimate shear strength parameters of bolt anchored section

Gu, Shuan-Chen (College of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an, China); Ye, Gen-Fei Source: Advanced Materials Research, v 383-390, p 218-223, 2012, Manufacturing Science and Technology

364. Numerical simulation of the heat transfer performance in heat exchanger inserted by disturbance device

Ji, Changfa (School of Energy and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Ji, Shumin; Li, Lixia Source: Advanced Materials Research, v 354-355, p 355-360, 2012, Progress in Power and Electrical Engineering

365. Peparation and magnetic propriety of carbon-coated iron magnetic nanoparticles by starch coating method

Chen, Jin (Faculty of Materials Science, Xi'an University of Science and Technology, Xi'an, 710070, China); Zhang, Haiyan Source: Applied Mechanics and Materials, v 164, p 17-20, 2012, Applied Mechanics, Materials, Industry and Manufacturing Engineering

366. AE regularity of coal failure shear deformation localization under triaxial dynamical loading

Ren, Fenhua (Key Laboratory of High-Efficient Mining and Safety of Metal Mines, Ministry of Education of China, University of Science and Technology Beijing, Beijing 100083, China); Lai, Xingping Source: Applied Mechanics and Materials, v 130-134, p 2235-2239, 2012, Mechanical and Electronics Engineering III

367. Damaged plasticity theory and its application in studying on fractured rock

Zhang, Zhi Qiang (Institution of Geotechnical Engineering, Xi'an University of Technology, Xi'an 710048, China); Li, Ning; Chen, Fang Fang Source: Applied Mechanics and Materials, v 105-107, p 1534-1538, 2012, Vibration, Structural Engineering and Measurement I

368. On the achievability of interference alignment for three-cell constant cellular interfering networks

Ma, Yanjun (School of Communication and Information Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Li, Jiandong; Chen, Rui Source: IEEE Communications Letters, v 16, n 9, p 1384-1387, 2012

369. Preparation of nitric humic acid by catalytic oxidation from Guizhou coal with catalysts

Zhiyuan, Yang (School of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Liang, Gong; Pan, Ran Source: International Journal of Mining Science and Technology, v 22, n 1, p 75-78, January 2012

370. Experimental study on shear strength of intact loess at different stress paths

Su, Sanqing (College of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, 710054, China); Deng, Botuan; Hou, Junfeng; Zhen, Lv Source: Advanced Materials Research, v 368-373, p 2891-2894, 2012, Advances in Civil Engineering and Architecture Innovation

371. Study on ultra-fine grinding and in-situ modification of Taixi super-low-ash anthracite

Zhou, Anning (School of Chemistry and Chemical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China); Wu, Yan; Yang, Fusheng Source: Advanced Materials Research, v 402, p 556-559, 2012, Advances in Metallurgical and Mining Engineering

372. Study on the preparation and photocatalytic property of N,Fe, Zn nano-TiO2 loaded on active carbon

Hou, Chentao (School of Geology and Environment, Xi'an University of Science and Technology, Xi'an, Shaanxi, China); He, Xia; Wang, Ying; Nie, Wenjie Source: Advanced Materials Research, v 356-360, p 331-334, 2012, Progress in Environmental Science and Engineering

373. The problems in solar building integrated development

Cao, Ping (School of Civil Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, China); Wu, Nan Source: Advanced Materials Research, v 374-377, p 296-299, 2012, Sustainable Development of Urban Environment and Building Material

374. Transverse temperature stress computation method of concrete thin-wall box-shape structure

Ren, Xiang (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, Shaanxi, China); Huang, Ping-Ming; Han, Wan-Shui Source: Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, v 25, n 1, p 76-82, January 2012 Language: Chinese

375. Relativity analysis on the detection methods of compaction degree for expressway subgrade

Zhao, Gui-Juan (School of Architecture and Civil Engineering, Xi'an University of Science and Technology, Xi'an 710054, China) Source: Advanced Materials Research, v 413, p 252-257, 2012, Materials Science and Engineering Application II

376. Optimization design of core thickness of exterior frame and core hybrid structures in high-rise buildings

Zhang, Shuyun (Xi'an University of Science and Technology, Xi'an 710054, China); Zhao, Wenwei; Wang, Haihua Source: Applied Mechanics and Materials, v 166-169, p 14-18, 2012, Progress in Structures

377. Path optimization for automatic guided vehicle based on fusion algorithm of particle swarm and ant colony

Hou, Yuanbin (School of Electric and Control Engineering, Xi'an University of Science and Technology, Xi'an, China); Yuan, Yiqian; Li, Baiping Source: Applied Mechanics and Materials, v 182-183, p 1452-1457, 2012, Applied Mechanics and Mechatronics Automation

378. Double-loop push-pull Forward DC/DC converter control system

Yue, Gai-Li (School of Electrization and Control Engineering, Xi'An University of Science and Technology, Xi'an Shaanxi, 710054, China); Li, Rong; Chen, Chao; Wei, Xiao-Long Source: Applied Mechanics and Materials, v 130-134, p 3365-3369, 2012, Mechanical and Electronics Engineering III

379. Mobile robot path planning and research in the improved artificial immune algorithm

Hou, Yuanbin (School of Electric and Control Engineering, Xi'an University of Science and Technology, Xi'an, China); Wang, Wei; Lu, Xiaoyue Source: Applied Mechanics and Materials, v 466-467, p 864-869, 2012, Intelligent System and Applied Material

380. Comprehensive line selection method based on the relative intensity of transient signal

Shang, Li Qun (Xi' An University of Science and Technology, Xi' an 710054, China); Zhao, Jia Jia; Wang, Jiang Ning Source: Applied Mechanics and Materials, v 157-158, p 1561-1564, 2012, Mechatronics and Applied Mechanics

381. Review of research on special load and vibration behavior of shaft tower structure

Hou, Junfeng (Key Lab. of Structural Engineering and Earthquake Resistance, Ministry of Education, Xi'an University of Architecture and Technology, Xi'an, Shaanxi, 710055, China); Su, Sanqing; Wang, Sheliang; Cheng, Kaifeng Source: Applied Mechanics and Materials, v 117-119, p 1552-1555, 2012, Materials and Computational Mechanics

382. The effect of Al2O3 concentration on properties of Ni-W-P-Al2O3 electroless composite coating

Sun, Wan Chang (School of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi 710054, China) Source: Advanced Materials Research, v 468-471, p 1163-1166, 2012, Automation Equipment and Systems

383. Gateway node design of underground personnel position system based on wireless sensor network

Yang, Yong (College of Electrical and Control Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi, 710054, China); Li, Yantao; Guo, Xiucai Source: Advanced Materials Research, v 468-471, p 1870-1873, 2012, Automation Equipment and Systems

384.Dynamical theoretical model and variational principles for coupled temperature-diffusion-mechanics

Suo, Yaohong (State Key Lab for Strength and Vibration of Mechanical Structures, School of Aerospace, Xi'An Jiaotong University, Xi'an 710049, China); Shen, Shengping Source: Acta Mechanica, v 223, n 1, p 29-41, January 2012

385. Parameterized modeling of parts based on Solid Works

Yan, Xiangtong (School of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China) Source: Advanced Materials Research, v 346, p 394-397, 2012, Sustainable Construction Materials and Computer Engineering

386. Parametric optimization design on mine carrier robot

Wei, Juan (College of Mechanical Engineering, Xi'an University of Science and Technology, Shaanxi, xi'an 710054, China); Ma, Hongwei Source: Advanced Materials Research, v 346, p 353-358, 2012, Sustainable Construction Materials and Computer Engineering

387. Preparation of SiC hollow spheres by template method and its performance of purification and regeneration

Fan, Zimin (Dept. of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an, 710054, China) Source: Advanced Materials Research, v 393-395, p 258-261, 2012, Biotechnology, Chemical and Materials Engineering

388. Prediction model of gas concentration around working face using multivariate time series

Dong, Ding-Wen (School of Energy Engineering, Xi'an University of Science and Technology, Xi'an, Shaanxi 710054, China); Li, Shu-Gang; Chang, Xin-Tan; Lin, Hai-Fei Source: Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, v 29, n 1, p 135-139, January 2012 Language: Chinese

  评论这张
 
阅读(252)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017